Adjustable wire stripper for Stanley utility blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick design for an adjustable wire stripper. I designed it specifically for 4AWG wire and the Stanley utility blade.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 1310
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hardware required:
- 2xM3 nuts
- 1xM3 washer
- 1xM3x5 screw.
- 1xM3x15 (or longer) screw.
- Stanley utility knife blade.
This was designed around American 4AWG wire specifically and the Stanley utility knife blade, with the intention to make it somewhat usable on some smaller wire. Blade depth is adjustable with the longer M3 screw.
Photo is from an older iteration of the design. I haven't printed the current model, yet. Let me know what needs improvement. I never had an intention for this to replace a proper wire stripper, but didn't want to wait on an order for a proper wire stripper.