1 / 10
Hobby Lobby Sewing Mannequin Leg and Body Mounts — zdjęcie 1
1 / 10

Hobby Lobby Sewing Mannequin Leg and Body Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement mounts for legs and body for a Hobby Lobby Sewing Mannequin

Ocena
5 / 5
Polubienia
3
Pobrania
55
Wydruki
1
Wyświetlenia
407
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

My son and his friend decided to fit this sewing mannequin with a chain-male shirt that was quite heavy.  The result was they broke mount for the legs and cracked the mount for the body. These are the replacement parts that I made to get the mannequin standing again.

This is a super easy print that does not require any support.  I did print this was ABS, 4 walls and 40% infill for strength.

After printing the body mount piece, I inserted a nut into the slot for locking screw.