Drill dust collector - Bohrstaubfänger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple drill dust collector.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 587
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This is a simple drill dust collector. Center size is 11mm with alignment cutouts. Print both parts. 0,2mm should be fine and glue the two parts after cleaning the supports.
20.7.23 I had an idea how to get rid of the print issue which had an unbelievably easy fix: a new step level - fits perfect in my print. The only issue left is the untidy print underside where the supports are. Maybe someone knows how to fix this?
9.7.23 Major Update: split Version available. I printed it. It is now 3mm thick. I had issues with the interlocking pins that didn't clean up good from the supports. Maybe someone has an idea how to enhance the print in this regard?
17.7.23: I split the model and will try to print it today.
This is my first 3d object made from scratch in Fusion360.
This is an improved version of https://www.thingiverse.com/thing:5665116 which can't be remixed because the author doesn't provide his file.
The horizontal lines have 5mm spacing and the material width is 1,5mm - not sure wether this is sufficient.
I haven't printed it yet. I will probably make the scoop part an extra part for optimized support placement - but don't hold your breath for now.