Water bottle cage Trek Session 2023
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can use straps or double-tape, I prefer AlienTape. Didn't had issue after 10 days of Mont-Sainte-Anne
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
You can use straps or double-tape, I prefer AlienTape. Didn't had issue after 10 days of Mont-Sainte-Anne. I left all the different step to get to the final result. I used the software 3D builder, basic and efficient. The slots at the bottom are to strap whatever you want: a tube, multitool, etc.
I will work on a revision that will include a support for pump, a tube, and everything we may need. The diameter of the bottle might need to get smaller.
TPU is not enough stiff.
PETG is nice but craky if you forget to remove the bottle before installing the bike on the MSA's gondola.
PLApro is a nice tradeoff so far.
Stay hydrated :)