Wall support for Sonos Era 100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall support for sonos era 100 speaker
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 492
- Wydruki
- 2
- Wyświetlenia
- 2309
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall support for Sonos Era 100 speaker.
The speaker orientation will be perpendicular to the wall (it's not exactly round, so you can not rotate it). It requires 3 screws in the wall (check images for hole-distances) plus one M5 screw for the speaker itself. There is space for the wire either through the wall (if you have thie possibility) or to the bottom.
The must have supports are for the middle part. In my screenshot from prusaslicer you will see that I kept supports also for the empty “circles” , but i think this is optional. I used PETG and variable layer height to be smoother on the front (or on the top, in the printing position).
The result looks very solid, I don't have concerns regarding the stability.