Customizable Pokemon Themed Nametag/Keyring (separate colors, not MMU, no filament change)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customize it with any name!
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 534
- Wydruki
- 6
- Wyświetlenia
- 2233
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
There are many similar models out there, but I wanted to make this for my nephew so I decided to make it customizable for any name and adjustable in size, etc.
Each color prints separately in single extrusion, so there's no need for painting, MMU or adding filament change commands to the gcode.
Print each of the parts (base, name, an ball parts) in the corresponding color and assemble. You may have to apply a bit of glue.
There's no need for experience with CAD software, I encourage you to try it. Open the file, put the name, adjust text size and other parameters, press F6 to render and export to stl (do this last part for each of the parts of the model).
I've pre-rendered a couple of examples. If you have a petition for a certain name I may upload it. Ask in the comments (cannot make promises about time of delivery 😅)
To customize to your liking:
- Download and extract the .zip file that contains the code and the .ttf font.
- Open the .scad file in OpenSCAD and use the customizer panel to adjust the name you like to render and other parameters.