Purse/bag hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purse/bag hook to hold your item while you are driving. No need to remove headrest to install!
- Ocena
- 5 / 5
- Polubienia
- 137
- Pobrania
- 501
- Wydruki
- 2
- Wyświetlenia
- 2542
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Have a passenger and don't want to put your purse/bag on the floor? Problem solved!
This model does not require you to remove the headrest
Purse holder designed in TinkerCad. I have tried it on several vehicles and it fits, so it should be generally a universal design. With the settings I used below, it holds a decent amount of weight.
My print settings were as follows:
Vertical shells = 5 to increase strength
Infill = 40% Gyroid
Supports = Yes = I did snug with overhang threshold of 30
Brim = Yes - May not be needed, but I did one just in case
Filament = PLA+ (would recommend something strong like +, PETG, ABS, etc)