Extended Picatinny Rail - Dart Zone Max Outlaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A picatinny rail for the Dart Zone Outlaw nerf blaster!
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 594
- Wydruki
- 10
- Wyświetlenia
- 2334
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel.
Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the screws. Simply remove the rails and install these new parts in their place!
Print this part with the front face on the print bed - files should be pre-oriented for this. The parts will require Supports, for the posts.
This is not an original idea - see the Remixes section for more. However, my version is based on the STEP files from RedCowl's design, and is a bit cleaner in my opinion.
If you like this design, please see my other mods for the Outlaw!
“Ex” BCAR Front End - Dart Zone Max Outlaw
Shrub Cylinder - Dart Zone Max Outlaw
Fidlock Plate - Dart Zone Max Outlaw
UPDATE 01/13/2024:
- Added hole placement for a Fidlock plate.
- Minor geometry tweaks.
UPDATE 05/26/2024:
- Replaced file type with STL for wider compatibility.
- Tweaked Picatinny rail geometry to better match the standard.