"Ex" BCAR Front End - Dart Zone Max Outlaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement front end for the Dart Zone Outlaw nerf blaster that allows for the use of the "Ex" BCAR!
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 576
- Wydruki
- 9
- Wyświetlenia
- 4109
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx.
This is installed just like the rest of RedCowl's frontend designs, please see their page for more details. Once the front end has been installed, simply screw in one of the “Ex” BCARs and you're good to go!
Print this part with the front face on the print bed - files should be pre-oriented for this. The part does not require Supports, but it may be useful for the little holes up at the top.
The “Ex” BCAR, or Bearing Centering and Rifling Device, adds spin to darts to greatly enhance their accuracy. I use it on most of my blasters and am a huge fan!
I have tested the Outlaw with this Bearing SCAR at multiple events and can confirm it is laser-accurate for minimal performance loss. I found that the 8 degree, 13.1mm variant was most effective.
If you like this design, please see my other mods for the Outlaw!
Shrub Cylinder - Dart Zone Max Outlaw
Extended Picatinny Rail - Dart Zone Max Outlaw
Fidlock Plate - Dart Zone Max Outlaw
10/15/2023 Edit: Added chamfer to resolve sticking when using the RadioactiveDesigns upgrade barrel (version “R2”).
10/09/2023 Edit: The file was not slicing properly. Replaced with a working version (version “R1”).
05/26/2024 Edit: Added STL version, as the 3MF version appears to have issues for many people.