BRZ/FRS/86 Custom Single Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom single cup holder replacement for the OEM 2-cup holder for the Subaru BRZ, Scion FR-S and Toyota…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a custom single cup holder replacement for the OEM 2-cup holder for the Subaru BRZ, Scion FR-S and Toyota GT86. Print this in ABS so it can withstand the extra heat while parked outside in the sun. It's designed with a larger diameter hole to be able to fit bigger bottles. This is why there's an insert to then accommodate smaller bottles and cans.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra Go
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament: Any ABS Any
Notes:
I'm not sure if the upper ridge really needs supports but the slicer will put them there. However, the notches on each side at the bottom, I haven't had great results with ABS bridging so you might need them there. I printed fully with supports (organic in Prusa Slicer 2.6.0 Alpha 6) and they removed fairly easily for the most part. I used a heat gun to remove the white markings from the support removals.
Category: Automotive