Ersatzrad für Radlaufglocke [Tire Bell] [Wheel Bell] [Bike Tire Bell]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement wheel for Tire Bell [Radlaufglocke]
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial

The tire bell is operated with the remote trigger on your handle bar. The bell itself is mounted near the tire. When operated it will use the tire to contuesly sound the bell.
Unfortunately, the bell wheel broke during a fall. Using the measurements from the remaining half of the original, I printed a 'replacement wheel.' Just like the original, my replacement wheel is made up of two halves. To create it, you'll need to print the attached object twice. I recommend using the G-Code file. This way, you'll get the profile (fuzzy) and a smooth surface. Then, you can simply glue the parts together using super glue.
Done.