Cardholder for Keychain (with Yubikey-holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cardholder for Keychain
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I designed a minimalistic card case for the key chain. It can be printed without support. A design with an additional Yubikey holder is also available.
usa a brim for better stability.
I tested the modell as PLA and PETG version, PLA is easier to print, PETG gives you more durability.
for the Yubikey Version, you need a Magott Screw M4x8
Update:
I've revised the model.
In version 2.0, the back panel is now thicker and features an open pattern, making it both more stable and more flexible. The YubiKey slot has been rotated for better usability, and the card holder has been adjusted to accommodate two cards. There's also a version with USB Type-C, one with USB Type-A, and one without a YubiKey.
You need a M4x10 Or a M4x8 Magott Screw