1 / 4
KitchenAid RearCap with fan / Tapa trassera KitcheAid amb ventilador — zdjęcie 1
1 / 4

KitchenAid RearCap with fan / Tapa trassera KitcheAid amb ventilador

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Due to the heat and the type of cooking I do, the KitcheAid would get very hot and even stop, so I put a fan on it

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

o o dPer evitar que la kitchenaid en temps de torrons s'escalfi, primer vaig posar un ventilador de peu encarat a la part del darrera de la KitchenAid. Posteriorment vaig dissenyar aquesta tapa per a ventiladors tant de 60mm com de 80mm. Aquests funcionen amb la mateixa corrent que la KitchenAid que, en el meu cas, és de 220v.

To prevent the KitchenAid from overheating in nougat weather, I first put a standing fan facing the back of the KitchenAid. I later designed this cover for both 60mm and 80mm fans. These work on the same current as the KitchenAid which, in my case, is 220v.

Aquest es el ventilador que he fet servir
This is the fan I used

https://www.amazon.es/Ventilador-80x80x38mm-31dBA-Sunon-SF23080A2083HSL/dp/B00MNJDUJY/ref=sr_1_2?__mk_es_ES=ÅMÅŽÕÑ&crid=2HGP1KAS16R36&keywords=sunon+80mm+220v&qid=1696868740&sprefix=sunnon+80mm+220v%2Caps%2C85&sr=8-2

Originalment la tapa de metall està enganxada al cos de la kitchen amb dues patilles de metall. Per a donar major solidesa i fer la peça més fàcilment imprimible, he substituit aquestes patilles per uns inserts roscats M3 on hi poso un cargol de 8mm separat uns 4mm de l'insert per fer l'encaix. La versió per a ventilador de 60mm és millor imprimir-la amb suports per mantenir la forma original de la peça. La versió de 80mm es pot imprimir sense suports.
El material emprat és ABS amb una alçada de capa de 0,2mm

Originally the metal lid is attached to the body of the kitchen with two metal tabs. To give greater solidity and make the piece more easily printable, I have replaced these pins with M3 threaded inserts where I put an 8mm screw separated about 4mm from the insert to make the fit. The 60mm fan version is best printed with supports to keep the original shape of the piece. The 80mm version can be printed without supports.
The material used is ABS with a layer height of 0.2mm

 

Ara ja puc fer torrons i pans sense patir per que se m'escalfi la KitchenAid

Now I can make nougat and bread without having to worry about my KitchenAid heating up

 

via Google Translator

Tagi