Car Vent Cooler Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of an easier to print Car Vent Cooler Holder; no supports required, screws used instead.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the idea from WWTech to make a holder to clip to the AC vents on my truck to help cool Chap Stick or other small items during hot summer days. I used the Car Vent Clips from TVm and made them a bit longer to add a screw hole, this way I print them separately and no supports required. The screws should self-tap if you don't have an M3 tap. Print in ABS, ASA, PETG or another filament that wont warp in the summer heat.
Hardware Needed:
2 x 8mm M3 screws
2 x 9mm OD M3 washers
I printed this in ATOMIC grey PETG.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.