Nanoleaf Aurora Power Supply Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently purchased a Nanoleaf Aurora and while I was excited to get the light, I wasn't excited by the power adapter…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I recently purchased a Nanoleaf Aurora and while I was excited to get the light, I wasn't excited by the power adapter and extra cabling.
Since I was going to be mounting this on a wall with nothing covering the outlet, I thought I'd design a small box to mount to the wall and discreetly contain the power adapter and extra cables.
I also ordered a smaller/thinner IEC cable to replace the long one that came with the Nanoleaf Aurora. You can find it here: http://a.co/01jRBo0
You'll also need 4 regular push-pins for mounting the body to the wall. Don't worry, they're concealed, so you can use whatever colors you have laying around.
Print Settings
Printer:
Kossel Clear Delta
Resolution:
.2mm
**Infill:** 100%
Notes:
Print one of each file (body and lid)
Post-Printing
Use 4 regular push-pins to mount the body flush to the wall. I also used a single 3M command cable clip to keep the power cable taut along the wall
Category: Household