1 / 2
Punisher Skull Flag Single Extruder Multi Color
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Punisher Skull Flag
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 464
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (27)Powiązane
Below are the heights where you need to change filament colors to achieve the Punisher flag.
How To Print
For Skull 1
White Stop @ 1mm
Blue Start @ 1mm Stop @ 1.4mm
Red Start @ 1.4mm Stop @ 1.8mm
For Skull 2
White Stop @ 1mm
Blue Start @ 1mm Stop @ 1.4mm
Black Start @ 1.4mm Stop @ 1.8mm
Red/Blue/green Start @ 1.8mm
Note: If you desire skull 2 to not have any blue in it, make white stop at 1.4.
Category: 2D Art
