1 / 4
SKTC A02 Tophat Mod, Dual HDD 3.5 Adapter and Vertical Stand (Goodisory) — zdjęcie 1
1 / 4

SKTC A02 Tophat Mod, Dual HDD 3.5 Adapter and Vertical Stand (Goodisory)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SKTC / Goodisory A02 PC case add-ons: +25mm Tophat, Dual 3.5 inch HDD adapter and Vertical Stand

Ocena
0 / 5
Polubienia
4
Pobrania
32
Wydruki
0
Wyświetlenia
718
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Stack on a tophat (+25mm) for the SKTC A02 computer case.  Use it to fit both a taller CPU heatsink and a topside 3.5" HDD, or 2x SSD with a generic 2x 2.5" to 3.5" bracket.  Secure the tophat with the top panel via longer 1-1/4 inch (~30mm length, #6-32 UNC) machine screws, common at hardware stores.

 

Expand storage to dual 3.5 inch hard drive (HDD) setup with the 3D printed adapter bracket.  Attach it to the OEM bottom 3.5 inch HDD position, then add two drives on topside.

 

Use the wedge style stand to position the case vertical.  It hooks onto the case's rubber foot for a steady mount.  Bottom clearance is 7mm high.

 

The SKTC case is sold under the Goodisory brand at the Amazon store.


3D print the models with support structure.

UPDATES

(Rev. 2) Reduced the HDD Adapter's height for better power supply compatibility.

SOCIAL

Find more D3Cove designs on Printables and Thingiverse.