1 / 1
7/8in Dowel Rod Bracket/Holder — zdjęcie 1

7/8in Dowel Rod Bracket/Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bracket for a .875" diameter dowel rod. The model is fully constrained in fusion 360 so you can easily edit parameters

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A bracket for a .875" diameter dowel rod. The model is fully constrained in fusion 360 so you can easily edit the parameters. I made the diameter slightly larger for the holder part of it to account for print variation since I am using a 1mm nozzle. Again, this can be easily edited in fusion 360. I would recommend printing it upwards with supports so the grain of the filament layers runs against the way the rod lays onto it so it doesn't easily snap. I hope someone finds some use out of this!