6 Cell Module Tray (Seed/Plug Tray)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable 6 Cell seed tray.
- Ocena
- 4,857 / 5
- Polubienia
- 127
- Pobrania
- 974
- Wydruki
- 9
- Wyświetlenia
- 4955
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
UPDATE: There is now a V2 of these cell trays with an improved design please check out https://www.prusaprinters.org/prints/71854-seedmodulecell-tray-mk2-seedplug-tray
This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for transplant. They also nestle together nicely for storage when not in use.
Cell size (Approximate): is 40X40X61mm
Overall tray size(Approximate): 124X83X63mm
For those in the states they are sizes so you should be able to fit 12 into a standard 1020 Flat.
Edit 27/3/21: I have now upload a second version with air pruning slots, Use the same print settings as the standard version but consider using a hight modify to increase the amount of infill on the lower section with air pruning slots.
Edit 30/3/21: added another version of the 6 cell tray, this version is square with bigger cells.
Cell size (Approximate): is 60X40X61mm
Overall tray size(Approximate): 124X123X63mm
Print Settings:
Layer Hight - 0.3
Perimeters - 1
Infill - 5-10% should be plenty
Support- None
Sugested Material- PETG, ASA