Garden Safety Knife / Zahradní bezpečnostní nůž
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A safety knife that can be used not only for gardening...
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This safety knife can be used in many ways when gardening, but at the same time there is no need to constantly uncover and cover the blade.
It protects not only the user, but also, for example, small children who might accidentally get hold of the knife.
Among the advantages are the easy blade change and the ergonomically shaped handle, which fits the hands of both right- and left-handed users.
Easily cuts a bag of substrate or peat


Cuts jute and plastic string with no problem

Cleanly cuts off unwanted stems and other

Prepress preparation and printing procedure
You will need:
3x M3 nut
1x 9mm break-off blade (part)
Slicing and printing of the "safety_knife" part
No special settings are required. The model orientation is ready. Layer height just 0.2mm, fill 20% or more.
Slicing and printing of "safety_knife_nuts"
The orientation of the model is ready. Layer height just 0.2mm, fill 20% or more.
If you use a height of 0.2mm, you need to set the print pause (code M601 in PrusaSlicer) before starting the 3rd layer, and insert a piece of the peel-off blade (3 blade pieces to be exact) at the specified location to serve as a print support. The advantage is a smooth and precise bridging surface. I recommend spraying or coating the blade with 3D varnish so that the filament adheres beautifully to it.


Then you need to set the print pause before the start of the 26th layer (if you are using a layer height of 0.2mm) and insert the M3 nuts into the prepared hexagonal holes.

Now just let the printer finish the rest of the model. The matrices will be neatly hidden.
You can take a look at the attached .3mf file.
The procedure to build the safety knife
For the assembly you will need:
- 2x M3x8 cross-slotted screws
- 1x screw M3x10 with cross groove
- printed part “safety_knife”
- printed part “safety_knife_nuts”
- cross screwdriver, of course :-)
Step 1

Step 2

Step 3
