Stockbridge Damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attempt to reduce back panel vibrations and resonance using a design based on the design of Stockbridge dampers
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an attempt to reduce noisy back panel resonances for certain print head speeds.
The design is based on Stockbridge tuned mass dampers https://en.wikipedia.org/wiki/Stockbridge_damper
Purely empirical with zero quantitative theory behind it. It reduced noise for my printer some, so if you have the same problem, it might be worth a try.
The center hole is sized to be a somewhat tight fit for a M4 bolt, the side holes are supposed to be tapped with a M6 thread. May need to clamp while tapping to prevent layer separation.
Add some random M6 bolts for added weight.