Parkside PHPA 20-li A1 hot glue gun replacement part (1.5mm shorter, and more clearance)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great original work, didnt fit with my shell, ( i assume they changed it). So i shortened it and gave it more clearance.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Removed 1.5mm of material from the biggest post, it intervered with my case.
Enlarged the pinhole that connects to the bending arm. The original was a bit too tight (maybe due to my layer thickness).
Added more spacing for the pivot point.
I heat treated (anealed) it in the oven at 90C, now its rock solid.
Installation video (timestamped):
Special thanks to @ThomasLTboom for having this publicly available. Saved me some time modeling! Parkside, get your stuff together, great tools. Though lacks in small places.