Premier One Fence Extender and clips and connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fence pole extender for Premier One poultry fences, plus netting clips and a pole connector
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a system for extending the height of a Premier One Poultry Fence. The fence pole extender is designed to clip tightly to the pole.
Then insert a garden stake (I use 18" green metal-core garden stakes from Ace Hardware).
Finally, attach supplemental netting (I use 24" black plastic garden netting, also from Ace) using zip ties.
To close gaps between the Premier One netting and the supplemental netting, use the little clips, also supplied here. I use 30 clips for a 50 foot fence; they pop on quickly and easily.
Note that the pole extenders are very tight and require some strength to snap onto the pole. This is intentional, because if they are too loose, they will slide down. If you are having trouble getting them on, try pressing with the palm of your hand, or get a gorilla friend to help.
It's likely that these extenders will soften over time and start to slide downward on the poles, but this can be fixed by attaching adjustable hose clamps below (these run about $0.25 on Amazon). We homesteaders have to improvise sometimes.
I used this approach to add about a foot and a half (half a meter) to a chicken run where my new Black Star hens have been easily flying over the fence and getting into trouble. This doesn't totally stop them but at least makes it harder to escape.
Note that you should install an extender on both poles at the "door" (see picture) so that you can easily go in and out.
I believe this won't affect the electrification, if you are using that feature of your fence.
UPDATE: I've added the pole clasp connectors, as requested.