Ford Fiesta model 97 seat knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front seat knob of a Ford Fiesta Model 97 to replace the original one broken by the passage of time
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Ford Fiesta model 97 seat knob
I have a Ford Fiesta Model 97, which, due to its age, is difficult to obtain this type of aesthetic spare parts.
After a long time, before purchasing my 3D printer, and having the seat in a single static position, I was able to design the part, print it and put the seat to work again correctly.
The piece is designed with its same external aesthetic shape, but with some changes inside, such as complete filling to generate greater rigidity and stability in the piece, due to its condition of being 3D printed.
This is the original knob, it was broken in the center
This is the replacement knob, 3d printed and already working
Most of the piece has a filling of 15%, except for the base which has 30% (a little denser), which is where the force is applied with the hand to turn the knob, and the central part which is where it enters. the metal piece that torques the plastic, which is 100% filled.
The part was printed in PLA, and has worked correctly so far, but you can get better results if you print it in PETG or ABS.
Due to the design of the part, it is necessary to print it with the help of supports for its central part.