Trenches for 28mm Wargaming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of modular trenches for 40k and other 28mm war games. These are the core structure of a finished trench.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 778
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of modular trenches for Warhammer 40k and other 28mm war games. These are intended to be the core structure for a finished trench. The taper off piece serves as an end cap. Every piece except the Bunker fits on an Ender 3.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10% or more
Filament: Multiple PLA Black
Notes:
I've printed most of these with a 0.4 or 0.5mm nozzle, 10% infill, no supports, on an old Ender 3, although the better-looking parts were printed on a Snapmaker Artisan.
Post-Printing =============
Making It Table-Ready
While you could use this as is, it is intended to be the base structure of the trench. It's designed it to be tall enough to fully conceal a Feudal Guard model when finished and to not conceal a standing Space Marine. This included the height of a base and popsicle stick duckboards. I also intended the entire surface to be covered in sand/dirt which will add some height to the rim.
The picture of the finished trench is out of foam and cardboard. It ended up being too shallow (the foam trench was inspired by The Cult of Crafting's guide for Modular Trench Tiles on YouTube, but I went my own way for parts of the design). It is included to demonstrate how the finished trench surface will look. I designed the uploaded trenches after realizing I made the foam trenches too shallow.
*Added a picture of a finished trench line.
Category: Toys & Games