Logitech z333 to monitor mount (any vesa 100 capable monitor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works for mono, dual, and triple monitor setups, needs Vesa 100x100 mount.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Logitech z333 to monitor mount (any Vesa 100x100 capable monitor)
! Important note: the current version of the arms has a flex that is a bit too high, which results in the speakers hanging a bit on an angle, this could be seen as a feature, but I'll update it soon with a stronger version which should negate this. also, I do not know how the Vesa plate is gonna hold up in the long run, but seems sturdy enough for now.
------------------------------------------------------
For mono monitor setup print the following
1x Vesa plate
2x back brace
2x arm
2x bracket
2x bracket but mirrored
Other parts needed
8x m6 nut and bolt (cut to length)
4x m4x20
------------------------------------------------------
For dual or triple monitor setup print the following
2x Vesa plate
2x back brace
2x arm
2x bracket
2x bracket but mirrored
Other parts needed
8x m6 nut and bolt (cut to length)
8 m4x20 screw
------------------------------------------------------
Other tools needed
Something to grind a bolt to length
Soldering iron (to insert nuts into print)
m6 wrench
Screwdriver (for m4 screws)