LED strip - clamp clip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this small clamp to fixate a LED or RGB LED strip on any furniture using a screw, a nail or glue/tape.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 579
- Wydruki
- 13
- Wyświetlenia
- 1713
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Usually a LED strip has some sort of adhesive tape on the backside. But somehow this tape, even when being supplied by a brand like 3M, won't stick for a long time. So I designed this small clamp to fixate a LED or RGB LED strip on any furniture you can drive a screw into.
A second version is for glueing when you don't want to use screws and the old (and barely sticking) adhesive tape on your strip can't be fully removed.
A third version is for using a nail. The hole is just big enough for a standard nail the size found with IKEA furniture.
For all versions you will find two models, one with a loose fit (e.g. when the strip has to be pulled though the clamp) and on with a very tight fit.
I designed this for strips measuring around 3 x 10 mm.
Print Settings
I go for 0.15 resolution, but 0.2 should do fine also.
You should have a well-sticking printbed. The objects are quite small, so if they disconnect from the bed use a raft or a brim.
How I Designed This
I designed this in Tinkercad, fell free to modify it there.
https://www.tinkercad.com/things/gY4bZzWHn8u-led-strip-clamp-clip-holder