1 / 4
Seat belt retainer for Marco Polo Camper Van — zdjęcie 1
1 / 4

Seat belt retainer for Marco Polo Camper Van

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement seat belt retainer for Mercedes Vito Marco Polo

Ocena
0 / 5
Polubienia
9
Pobrania
39
Wydruki
0
Wyświetlenia
612
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement part for the seat belt retainers that are used to keep the rear seat belts out of the way while using the Marco Polo in camping mode. This is not safety equipment, but a convenience. 

 

Printing

Use PETG or similar material. I used colorFabb nGen Dark Grey and it works really well. Materials such as ABS are possibly even better, but I haven't tried.

Use a good amount of infil. I've used 40% Honeycomb (Orca Slicer).

You'll need to add support under the bar and possibly for the larger hole. Slim, single walled tree support works well (Orca Slicer).

 

Installation

Easy: Remove your old/broken seat belt retainer, reuse the screw for your new printed replacement.

 

The Marco Polo model is a W638 Mercedes Vito 2002. I don't know if it fits older or newer models.

Tagi