1 / 1
Tamiya TT01 High Grip Rear upright 2.5 degree Toe in with lower roll center — zdjęcie 1

Tamiya TT01 High Grip Rear upright 2.5 degree Toe in with lower roll center

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TT01 High Grip upright

Ocena
0 / 5
Polubienia
36
Pobrania
245
Wydruki
0
Wyświetlenia
2061
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

After many tests and development this is the result.

High Grip rear uprights with lower rollcenter and 2.5 degree toe in.

I recomed to print this of pla strong from esun or PCTG.

I drive this upright in a 17.5T powered Car indoor on carpet a complete season without problems.

Tagi