1 / 7
Headphone Stand Hanger - Door, Drawer or Wall Mounted
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple sturdy headphone hanger that slots onto a drawer or door.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 343
- Wydruki
- 4
- Wyświetlenia
- 1100
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (1)Kolekcje (49)Powiązane
A simple sturdy headphone hanger that slots onto a drawer or door.
Has a gentle curve to mould to your headphones.
Slots onto a door/drawer thickness up to 19mm.
Also includes a variation to screw to a wall or the side of your desk with 2 screws.
Printer settings:
- Print on its side.
- No supports.
- 0.2mm layer height.
- Brim - I used one, but you might get away without one, depending on how good your bed adhesion is.