Battery cover for APC uninterruptible power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This battery cover definitely fits BE550G and BN600G (Back-UPS ES 500 and Back-UPS 600). It likely fits others also
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a replacement battery cover for some APC uninterruptible power supplies. I can't be sure of all the models it will fit, but I designed it for the BE550G and BN600G models. If you need a similar looking cover that uses two latches instead of one, try this model by Azalex.
I started out trying to match the original cover as closely as possible, but modifying the side rail design allowed me to significantly reduce supports needed. I have included the full model that includes the full side rails, as well as the simplified model that improves printability. You will still need supports on the build plate and model in order to print some of the retaining nubs. I'll admit that this isn't the greatest model in the world, but it gets the job done and I've done all the fine-tuning I can stand.
I printed in GreenGate PETG with tree supports. Support removal is easy with some side cutters and maybe a flathead screwdriver, but you'll probably need a small file or sanding stick to get the part moving smoothly.
Model files are attached so you can modify them however you want, adjusting tolerances, removing features to improve printability, etc. These models work well for my printer and my UPSes, but I can't verify that all UPSes are constructed or fit together the same way.