Base for inventr.io HERO and breadboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A themed, shuttle-shaped base to hold your HERO and breadboard in place while taking the "30 Days Lost in Space" course
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A large, stable and totally unofficial shaped base to hold the main parts of inventr.io's “30 Days Lost In Space” kit. This space base is fully friction fit (so, may depend on your printer) and holds the HERO module and small breadboard firmly in place, and they can be removed as needed. Clearance around the USB port is just right for the standard USB cable to fit.
Note that this barely fits on a Mk3s+ base in the right orientation. You won't need much infill - I used 10%, at a 0.2 layer height to get the top fillet smooth.
Please share any makes and let me know if you have any problems with the friction fit! The parametric f3d file is included in case you need to tweak anything.
Benny not included.