Lippert Screen Assist Custom Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shallow Bracket when drawers interfere with standard mounting.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom bracket for the Lippert Screen Door Assist for narrow / close door opening situations.
In our RV, the standard bracket was just a bit too far-out and would interfere with one of the drawers. You could push on the bracket then open the drawer, but that gets annoying really quickly and you need two hands just to open a drawer.
The standard bracket is a pretty basic shape, so I sketched two versions of the bracket, reversing the position of the handle opening to give more clearance. Version 1 is about 10mm of clearance, version 2 removes the bump all together and centers the handle inside the bracket to give maximum clearance. That's the version I now have installed.
It has worked perfectly for several weeks of camping. I printed in PLA and it's been fine in 31c temps. I don't think the interior of the RV would get hot enough to make a difference, but you may want to use PETG or ASA.
Please post a make if you use this!