1 / 3
Magsafe iPhone Stand — zdjęcie 1
1 / 3

Magsafe iPhone Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another iPhone Magsafe charging stand

Ocena
5 / 5
Polubienia
72
Pobrania
665
Wydruki
9
Wyświetlenia
3097
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

Inspired by several other designs none of which checked all my boxes I decided to construct yet another magsafe stand from scratch. It needed to 

  • be high enough for my new iPhone 15 Pro to “float”, 
  • be freely swiveled from portrait to landscape, 
  • have only a minimal ring around the magsafe puck,
  • hide the cable completely,
  • secure the cable to the base. 
     

The stand holds the phone at an angle of 25°, the magsafe puck fits nice and tight and protrudes just enough to hold the phone safe and approx. 0,5 mm free of the actual stand (to avoid accidental scratches). 
The cable needs some forceful wiggling to snap into its channel in the base but once in it stays there. 
 

High enough to accomodate the Plus/Max models as well

Constructed with Shapr3D on my iPad, printed in PLA with 20% infill, no supports needed. 
 

Tagi