3030 Duet Wifi 2 Case - M3 Nuts, 40x40mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this the design to accommodate M3 screws instead of the M4 screws that that the Duet Wifi 2 has holes for. If…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed this the design to accommodate M3 screws instead of the M4 screws that that the Duet Wifi 2 has holes for.
If you want the fan duct, see the original design! https://www.thingiverse.com/thing:3068810/
Make sure to use either washers or an extra M3 nut/spacer to help secure the PCB.
I also added a 40x40mm fan mount on the case above the main IC. Mount it with x4 M3 screws and x4 M3 nuts on the fan side.
This design requires:
- x4 12 to 15mm M3 screws
- x4 M3 hex nuts
Print with or without supports, PETG or ABS.
Category: 3D Printer Accessories