Lever for Schou 6866RS - telescopic car scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Broken lever from nice car scraper? Don't throw out - just fix it!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Object: Quite expensive car broom scraper bought on CircleK.
Model: Schou 6866RS - telescopic scraper with rotating broom.
Part: Lever for telescope.
Description:
The most expensive carscrapper from Circle K, looks great, works nice - to bad that so short.
On a bigger frost, the lever from the telescope wanted to fly into space (a pity, because not much was missing, and its speed would have been able to carry it into the orbit of the earth :D). Anyway, as we known, I fix, not throw away, so we draw and print.
I put files for lever and screw cups for M6 bolt. Cups has size of hex head ~9.9 mm quite tight fite so if you screw has little bigger head you can easy scale it on x,y plane in slic3r.
Part was redesigned from original part. The factory solution had a very large constriction where the risk of cracking was high, especially in cold weather (when you need it, like always :P).
Notice:
Printed on Prusa MK3S+, 0.4mm nozzle with Prusa PLA on default settings in slic3r. If you need to use with another nozzle/material just change setting on slic3r or if you cannot do it, just write message to me.