Lightweight Spool for samples and sharing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,25 € – 0,31 € netto (bez VAT)
Dla pliku: Ready to print with generic PLA on Prusa MINI / smallspoolcore15_02mm_pla_mini_21m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,28 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 21 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
With this spool you can share your favourite colors with friends.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 95
- Wydruki
- 5
- Wyświetlenia
- 1014
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
About the spool:
- lightweight modular filament spool (<50g)
- The spool is as strong and lightweight as you want (just change infill or perimeters)
- vase mode core (various heights),
- can handle up to 250g of filament,
- with tag to indicate filament type,
- with 5 slots on both sides to easy secure filament end tip and one slot to secure filament start tip.
Features:
Customizable strength and pattern (via infill and perimeters)  | Easy slots for securing the ends of the filament  |
Replacable tag with filament type  | Lightweight snapfit core  |
Smallest height (15mm) can handle 100g of filament
 |  |
Largest height (40mm) can handle 250g of filament
 |  |
This is just another spool. It can handle up to 250g of filament - so It's ideal for sharing filament with friends. You can take 1kg spool, print 4 spools and distribute remaining 800g into those four spools. And if you already have spools - just split the spool into four batches of 250g.
Why I created this one instead of using existing projects? Because I didn't liked those that are already here - especially how much filament it takes to print. I also wanted all the features in one project.
How to print
Spool plate
- set the number of top and bottom layers to 0.
- set perimeters to 3 or more
- set the infill you want (honeycomb 15% is my favorite)
- set Extrusion Multiplier/flow rate to about 108% for better connection of parts and optionally disable Elephant Foot compensation
- optionally increase line width for even stronger spools
Spool core
- turn on spiral/vase mode
- add 2mm brim (you don't have to remove it after printing)
- set line width for 0.8mm
Spool tag
- easy way is to print it blank and use sharpie to put the filament type
- 3d printed way:
- for MMU/AMS - just add text modifier in slicer - and set different extruder for this element
- for single nozzle - you can also add text object in slicer but select “cut” operation
- for single nozzle printers you can also create fake MMU printer in Prusa Slicer with M600 code for changing filament and make it color (this is what I did). more info on this method on my Hex ukulele project.
Print two plates and one core for full spool. Add two spool tags if you want.