Slap Chop Replacement Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For when you've Slapped/Chopped a little too hard
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The big button you slap on the top of my Slap Chop cracked after only a few weeks of using it, so I designed a replacement part that's much more solid, and is also much easier to reassemble (since it has a built-in cone guiding the spring around the rod into place).
Printing
The inside of the knob has a little flat part for the spring to hold against, which requires some support structure to print cleanly: the basic “knob.stl” includes a removable 0.4mm one-perimeter cylinder inside the knob for this purpose. The “no-support” version of the model is provided if you want to try an alternative support structure/orientation, or if your slicer has a more clever bridging strategy that would make this support unnecessary.
I printed this in PETG, with default infill: other materials like PLA would probably work just as well, though I'm not sure if they could take as much of a beating.
Source code
The OpenSCAD source for this model is available on GitHub.