Asus ROG Ally carrying case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hard carrying case for the Asus ROG Ally console.
- Ocena
- 4,714 / 5
- Polubienia
- 193
- Pobrania
- 1109
- Wydruki
- 9
- Wyświetlenia
- 13 213
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of the carrying case for the Asus ROG Ally console.
I didn't find any that I liked or that looked sturdy enough online. So I made a remix of Yanev's box.
To assemble it, you will need:
- m3 nuts X 8
- m3 10mm screws X 8
- m3 30mm screws x 6
The console has the right place inside the case, but to prevent it from moving, also add some foam cutouts. At the ends of the console and above the speakers is usually a good place and the console is firmly supported. (see images for reference)
The anchoring at the joint does not touch the console at the top or bottom and adds a lot of rigidity to the assembly.
It requires no supports and can be printed with or without MMU.