Bottle Cap Spout 25mm / Octopus Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Without a spout, filling tends to get messy - so I designed one.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
To keep my household clean and my wife happy, I tend to fill cleaning liquid into my robot vacuum every evening. This is a mix of distilled water and some cleaning fluid, filled neatly into 1000 ml bottles from "Octopus" (or rather amazon).
Without a spout, filling tends to get messy - so I designed one. It should also fit on other bottles with 25mm threads.
I printed mine with red PETG, just because this spool was loaded. Might print one in TPU if I have the time.
Printed with tree supports - but they remove quite well and are on the inside, so clean surface is not really important.