1 / 1
Make Your Own 62cm/24" Headstone (for Halloween) — zdjęcie 1

Make Your Own 62cm/24" Headstone (for Halloween)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

62x42x5 cm / 24,4x16,5x2 inches. Use cardboard for the middle.

Ocena
0 / 5
Polubienia
6
Pobrania
34
Wydruki
0
Wyświetlenia
369
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

62x42x5 cm / 24,4x16,5x2 inches. Use cardboard for the middle of the stone.

You can print all parts on one plate. I have included 3mf files for Bambu Lab X1/P1P and Prusa i3 MK3S. You will need around 480 grams total of filament for this print.

Print settings:

When printing with a 0.4 nozzle, 1× 0.6mm wall, layer height 0,2 mm, 0% infill and 3× top and bottom layers. Use a brim. No supports needed.

It is a 11 hours print with Bambu Lab PLA on the Bambu Lab X1.

On a Prusa i3 MK3S it takes 1 day and 9 hours according to Prusaslicer. I have made the parts a little bit less deep to get them to fit on one MK3S plate.

 

Tagi