Mission Model Paint Gridfinity Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2x4 Gridfinity bin to hold 6 bottles of Mission Model paint and a bottle of thinner and polycrylic.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A minor remix of Jamie's Gridfinity openSCAD glue_stick holder so they can hold bottles of Mission Model, paints, and thinners.
I'm new to openSCAD, and my changes were brute force and may break if you try parametric changes in the openSCAD models. If you change the number of bins, you must edit the list of translated vectors to reposition the holes.
I'm attaching the bins to a 3 x 4 screw-together base designed by Kyle Warren: https://www.printables.com/model/300603-gridfinity-screw-together-baseplate/comments/1145753.
Updated: 2024.07.22
I added a version of 8 mission model paint bottles.
The bins were printed on a Prusa XL using Keene Village Performance PLA. While more expensive, the KV performance PLA has superior heat deformation properties, 144 C vs. 55 C for regular PLA.
They can be easily printed at your favorite print settings. The settings I used were:
- 0.6 mm nozzle
- 0.25mm Speed
- supports from the build plate
- no brim
- 15% infill