40g coffee bean cannister
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for larger single portions of coffee. Holds approximately 40 grams of beans
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Need to learn 3d modeling. So started with something fairly basic, that I can use.
It is a single serving (for large, French press quantities, etc) coffee bean cannister, to hopefully help keep the beans more fresh. So you open the bag once to fill all the cannisters, and then only open each cannister when needed, instead of each day.
Holds approximately 40 grams of beans, and has a slight gap under the lid, so a silicone seal can be added. (It helps a lot! Can smell the coffee through ones with no silicone, but smell nothing from sealed cannisters)
Dimensions are made with 0.6mm walls in mind, but should work with 0.4mm. It may just be slightly loose, and require the silicone seal to help keep the beans fresh.
Will design a tray as soon as possible, and make a 0.4mm nozzle variant.
Enjoy, and happy brewing!
Printed on ender 3,
with 0.6mm walls,
0.35mm layer height,
15% cubic infill,
2 walls,
3 top/bottom layers