Rubber Ducky Zoidberg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How without a screw? 🔩🦆
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 264
- Wydruki
- 2
- Wyświetlenia
- 1487
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I took the 3d-printing-base-single-hole-mount-v4.step file as a basis.
I added an m14 screw and a nut (even three, for convenience).
Since the basis of this clip, my screw will be convenient to screw first into the object you need, and insert the other side into the hole in the case.
Don't worry about gaps, I increased them 👌
Its form allows you to print without supports ✅
nut-M14(5).stl, nut-M14(10).stl, nut-M14(cap).stl - printing without supports, even upside down ✅
---
Well, a bonus is a wonderful Duck Zoidberg with a hole for this screw 🦆
For its beak (tentacle?🦑🤔), of course, supports are needed, and the threaded hole does not need this.
In fact, in Zoidberg, I used nut-M14(cap).stl
As you understand on the one hand, in fact, the latch, one axis is not fixed and has the ability to rotate, which is very convenient.
