Bondhus Hex Driver Peg Board Substitude
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Substitute for "Wall control" peg board to hold peg board mounted hex driver holder
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model to be “substitute" for the wall control pegboard that is used to mount the “Hex Driver Peg Board Mount” created by SafetyGlassesRequired
I did not modify the mounts at all, just created this to hold the mounts as I don't have that particular kind of peg board.
It's a big print volume. I've got an SV06+ with a 300x300 print area and it just barely fit diagonally.
SV06+ with a 0.4mm nozzle
0.3 layer height, gyroid infill (15%)
Takes about 7 hours to print
Used Inland PLA in black.
Model was created in TinkerCad