Between adapter compatible with Ryobi Link
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes the thing to the left or right is too big
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Sometimes you need to mount something to the rail that is offset/between the normal Link rail mounting location, maybe to avoid a tall tool mounted on the rail below, or a wide thing that is mounted to the left or right.
This adapter wishes to solve all your Link rail woes! Normally just print the L and R adapter as a set, MID adapter is only needed for things like the double organizer bin. Note that I've provided a set of adapters that work only for bins (bin-only), and another set that works with everything (complaint).
I would not suggest using these for extremely heavy things like the tool shelf or cabinets unless maybe you printed it as 100% infill.
Suggested print settings:
- 0.20mm QUALITY
- Prusament PETG (pictured using OVERTURE PETG Grass Green)
- Infill density 20%
- Infill pattern Grid
- 3 Perimeters
- No supports
Don't have a 3D printer yet? That's OK, order already printed from…