1 / 2
Barbell 2" Collar / Barbell Clamp - Print-in-Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place barbell collar / barbell clamp for 2" bar.
- Ocena
- 4,667 / 5
- Polubienia
- 170
- Pobrania
- 1521
- Wydruki
- 3
- Wyświetlenia
- 5896
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (1)Kolekcje (204)Powiązane
Learning from my first design, this is a 2" barbell collar/clamp that is entirely print-in-place. No additional hardware required.
I printed mine with a .6mm nozzle and .2mm layer heights – but a 0.4mm should work just fine as well.