1 / 2
NEMA14 Motor Shim for Magnetic IDEX extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you just need a shim.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I realized that not everyone is able or willing to modify BMG clone gears. This shim is a simple solution for that problem. Print it as thick as you need, usually about 0.5mm. The best part is that it can be printed in PLA! How? Because “garbage air” is cooling extruder motor 😊