TB-12 Single-Shot Airsoft Shotgun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed Single-shot airsoft shotgun.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 519
- Wydruki
- 1
- Wyświetlenia
- 3399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Videos on TB-12:
All the necessary hardware, print settings, and the like is already in a user guide I made it's in the google drive link.
https://drive.google.com/drive/folders/1TYpj32koxeIu51LL6fq2uwCur0sY_6Qv?usp=sharing
NEW TRIGGER AND MAINSPRING ASSEMBLY: https://www.printables.com/model/613723-tb-12-new-main-spring-and-trigger-assembly
NOTE: Only PPS Shells are compatible with the current barrel. For APS and HAWSAN shells, check my profile.
Full-length Barrel (PPS only) and Stock is also available in my profile
Changelog:
30/12/2021:
Added new hammer for TB-12. ( Trigger not sitting at intended place added flat surface on hammer to counter that.)
31/12/21:
Currently looking into metal leaf springs in replacement of the Main Spring. The 3D Printed Mainspring is now a temporary part until I do my tests.
26/02/22:
Added New Trigger.
New Main Spring and Trigger Assembly available link is up in the description.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
50
Filament: PLA+, PETG
Category: 3D Printing