Lovley Pumpkin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a Pumpkin with inbuilt flickering LED. You can scale it up to put an electric TEALIGHT in it. original Diameter is 85mm.
- Ocena
- 4 / 5
- Polubienia
- 30
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i made this little pumpkin some years ago to put a flickering LED inside.
Every year am print some of them as giveaways for friends. Now you can print them on your own. you can add a LED with a CR2032 Buttoncell with a socket and a small switch and glue them on the Top-part.
I printed them mostly in PLA and finishing the surface and airbrushed them. Now I made one in orange PETG. I recommend PLA because of the easier removing of the support.
Printed on MKS3+ and Makerbot Replicator2(years ago) in 0.2 and 0.1mm Layerheight
Have fun and happy printing.
and do not eat too much sweets… ;-)